Lancia Beta parts and services

We have been gradually increasing our stocks and knowledge base on the Beta range following our acquisition of Scorpion Reproductions. The list below is by no means exhaustive, so please contact us and we may be able to help.
For Montecarlo / Scorpion information, please click here

We are also able to prepare cars for historic racing usage.

ß books and manuals

ß HPE tailgate gas struts

 
Beta suspension bushes
Beta workshop manuals, various
Beta technical data book

Beta tavola book, various

Tuning and Modifying Fiat/Lancia twin-cam engines by Guy Croft

Lancia Beta Collectors Guide

Beta Gold Portfolio 

HPE tailgate gas struts are often weak, and many owners keep an old broom handle in the boot to prop the tailgate open !

We have had both standard HPE and uprated struts for the HPE VX or cars with rear spoilers.

They are of brand new manufacture and have the correct end fittings so no modification is required to car or strut.

 

 

  

Lancia ß suspension bushes have now been made from polyurethane in both a road or race composition.

These bushes will give a firmer ride than standard, but they do have some complience which machined nylon doesn't have.

front wishbone bushes
front anti-roll bar bushes
rear anti-roll bar bushes

 
Beta steering & suspension
  

Beta ignition parts

  

Beta body rubbers

Track rod ends stocked for cars with and without power steering.

Suspension ball joints also stocked

We also now have reproduction suspension bushes in polyurethane (see above)

BETA RHD PAS steering racks, new

BETA RHD NON-PAS steering rack, new

  

Spark Plugs
HT leads
Distributor caps
Rotor Arms
Condensors
Contact Breaker Points
Coils

   Beta Coupe

Windscreen seal, front & rear

Beta Spider (Zagato)

Bonnet Seal
Boot seal
Roof seal front and rear
Roof seal left and right
Door aperture seals 
Door glass "fuzzy" strips
Door surround seals
Window channel seals

We can source Beta Spider hood seals for both the series 1 and series 2 designs

If you need a seal not listed above, please supply a sample or a drawing and we will endeavor to source as required.

 

Steering wheel boss

Beta panels

  
Upholstery Cloth

We can supply a steering wheel boss, suitable for the Lancia Beta, which allows fitment of many aftermarket steering wheels (including Momo etc)

A Lancia hornpush, all screws and allen key included.

We have outer sill panels made for both Beta Coupe / HPE and Beta Spider (Zagato)

bonnets (made from grp)

We can also supply wheel arches for some Beta models

 

We are able to supply some of the cloths used by Lancia for trimming the interior.

This is purchased to order.
 

Carburettor overhaul kits

Beta Hub Tools

  
Beta badges

We can supply carb kits for the Solex or Weber carbs used on Betas.

Solex 32 & 34mm CIC
Weber 32 & 34mm DMTR
Weber 32, 34 & 36mm DAT/DATR

We can also supply carburettor overhaul kits for Weber DCOE, Weber DCNF or Dell'Orto DHLA carbs which could have been retro-fitted.

If you wish to fit a pair of DCOE or DHLA carburettors as part of a fast road specification engine, we can supply a suitable inlet manifold

This is a useful tool for removing and refitting the Beta hub nuts. Takes a 3/4" socket wrench or a 10mm lever bar.

  

Self adhesive reproduction versions made for HPE Volumex Betas

Omicron Engineering Ltd,
The Long Barn,
Mulbarton,
Norwich, Norfolk,
NR14 8JS, UK		 tel: ++44 (0)1508 570351
fax: ++44 (0)1508 570795
E-mail: info@omicron.uk.com
Internet: www.omicron.uk.com

Back to the home page: Omicron		 Andrew Cliffe Copyright © 2003
andrew@omicron.uk.com